Spider Performance Automotive Index::
1000 cfm throttle body Edelbrock 3978 universal competition 1949-1953 Ford Mercury flathead cylinder head Edelbrock 1115 1978-1988 GM A body G body
http://www.spiderautomotive.com/ind.htmlHOME |
I have a set of dies (#47765). Will these dies work in an old 811 Universal Die Head?
I guess I am wondering if the 811A dies will work in an 811 UDH?
Thanks In Advance. Batteries & Chargers - SJ Media Systems::
Chart HDU HD Universal BF CR GSG Test Canare Die Set for BCP-C3 or RCAP-C3A Melon Light Head Mountable 20 LED Flashlight With 3 Settings Plus
http://www.sjmediasystem.com/tools---test-equipment-batteries---chargers.htmlHOME |
Mr. Ross,
Yes the dies that you have will fit in to an old 811-die head. The main difference between the 811 and the 811A was the fact that the 811A was a through head oiling die head when it was used on the appropriate machine. The dies are interchangeable between an 811 and an 811A.
Sixteen Candles (1984)::
6.9/10 18,811 votes. Director: John Hughes. Writer: John Hughes (writer) Joan Cusack brought acceptance to head-gear wearers everywhere, proving that
http://us.imdb.com/title/tt0088128/HOME |
I hope this helps.
Thanks Adam.
I installed the dies. However, they will not open far enough to thead 1/2 pipe.
The dies converge in the center before the minimum adjustment is reached. When the maximum adjustment is reached, the dies are almost open far enough to thread 1/2 pipe.
(Yes, they are in the prpoerly numbered slots.)
Any ideas?
Thanks Again.
 Red Hat's Rough Recovery From CFO Exit
 Windows Live Finds a New, Pre-installed Home
|
Universal Die Head 811/A, 
PRINT
Add to favorites